Boot Sizing Guide

Getting the right boot size is the single most important factor in figure skating comfort and performance. Unlike street shoes, figure skating boots must fit precisely — a boot that is even slightly too large will compromise your control, cause blisters, and shorten the life of the boot. EDEA boots use millimeter measurements rather than traditional US or EU shoe sizes, giving you the accuracy needed for a true performance fit.

EDEA Overture figure skating boot

Why You Cannot Use Your Shoe Size

One of the most common mistakes new skaters make is ordering figure skating boots based on their street shoe size. Shoe sizes vary dramatically between brands and are only rough approximations. A size 7 in one brand may fit completely differently than a size 7 in another. EDEA eliminates this guesswork by sizing boots in millimeters based on your actual foot length. This means your EDEA size is a direct measurement — not a conversion from an unreliable shoe sizing system.

💡 Tip: EDEA sizing is based on your actual foot length in millimeters. Forget your street shoe size entirely — it will not help you here.

How to Measure Your Foot

Follow these steps to get an accurate measurement at home:

Step 1: Time it right.
Measure in the afternoon or evening. Your feet swell throughout the day, so measuring later gives you a more realistic size for skating sessions.

Step 2: Wear your skating socks.
Use the same thin skating socks you plan to wear on the ice. Thick athletic socks will throw off your measurement.

Step 3: Set up your measuring surface.
Place a sheet of paper on a hard floor against a wall. Stand on the paper with your heel touching the wall, distributing your weight evenly on both feet.

Step 4: Mark the longest point of your foot.
Have someone mark the tip of your longest toe (usually the big toe or second toe) with a pen held straight down. Do not angle the pen.

Step 5: Measure the distance.
Measure from the edge of the paper (the wall) to the mark in millimeters.

Step 6: Measure both feet.
Most people have one foot slightly larger than the other. Use the larger measurement when selecting your boot size.

💡 Tip: For the most accurate results, have someone else mark the paper while you stand still with your weight evenly distributed. Bending down to mark it yourself shifts your weight and changes the measurement.

EDEA Sizing Chart

Once you have your foot length in millimeters, use the chart below to find your EDEA boot size. Your boot size should match or be very close to your foot length measurement. EDEA recommends no more than 10mm of growth room for children, and adults should aim for as close a fit as possible.

Foot Length (mm) EDEA Boot Size Approx. US Women's Approx. EU
205 - 209 205 1 31
210 - 214 210 1.5 31.5
215 - 219 215 2 32
220 - 224 220 2.5 33
225 - 229 225 3 34
230 - 234 230 3.5 34.5
235 - 239 235 4 35
240 - 244 240 5 36
245 - 249 245 5.5 36.5
250 - 254 250 6 37
255 - 259 255 6.5 38
260 - 264 260 7 38.5
265 - 269 265 7.5 39
270 - 274 270 8 40
275 - 279 275 8.5 40.5
280 - 284 280 9 41
285 - 289 285 9.5 42
290 - 294 290 10 43
295 - 299 295 10.5 43.5
300 - 304 300 11 44
305 - 309 305 11.5 44.5
310+ 310 12 45
⚠️ Important: The US and EU sizes above are rough approximations only. Always use your millimeter measurement to select your EDEA size. If your measurement falls right between two sizes, round down — EDEA boots are designed to fit snugly and will conform to your foot shape after custom shaping.

Width Options

EDEA boots are available in four width options to accommodate different foot shapes:

Width Description Best For
B — Narrow Narrower across the forefoot Skaters who find standard-width boots too loose
C — Regular Standard width Most skaters — start here if unsure
D — Wide Extra room across the ball of the foot Skaters who feel pressure on the sides in C width
E — Extra Wide Maximum forefoot room Skaters with particularly wide feet

To determine your width, measure across the widest part of your foot (the ball) while standing. If you are between widths, custom shaping can often resolve minor width issues by expanding the boot slightly at pressure points.

Common Sizing Mistakes to Avoid

⚠️ Important: These mistakes are the most common reasons skaters end up with boots that don't fit. Read them carefully before ordering.
  • Buying too large for "room to grow." Oversized boots reduce control, make learning harder, and can cause ankle injuries. For children, no more than 10mm of growth room is recommended.
  • Using your street shoe size. Always measure your foot in millimeters. Do not convert from US, UK, or EU sizes.
  • Measuring with thick socks. Skating socks are thin by design. Thick socks bunch up inside the boot and reduce the precision of the fit.
  • Measuring only one foot. Always measure both feet and use the larger measurement.
  • Measuring while sitting. Stand with full weight on your feet — your foot spreads under load, and this is how it will be in the boot.

Next Steps

Once you know your size, consider having your new boots professionally custom shaped for a custom fit. Pair them with thin EDEA Skating Socks designed specifically for figure skating, and learn proper lacing techniques to get the best support and comfort from your boots.

Need Help?

Choosing the right equipment can feel overwhelming, but you don't have to figure it out alone. We're real skaters helping real skaters — no pressure, just honest guidance.

Contact Us